Hello!

Xaudia offer microphone re-ribboning and repair services.

2014/09/30

Mount-a-Mic assembly instructions

Here is a step-by-step guide to assemble an Xaudia Mount-a-Mic cable:

1. Make sure you have all the parts.

2. Strip and prepare the cable ends ready for soldering. Push through the Mount-a-Mic adapter

3. Solder the female XLR connector. We recommend connecting the barrel lug to pin 1.

4. Fit the plastic strain-relief

5. Slide the metal barrel over the plastic parts

6. Slowly screw the barrel into the adapter, allowing the cable to rotate freely as you go. 

7. Fit your choice of connector to the other end, and enjoy!