Here is a step-by-step guide to assemble an Xaudia Mount-a-Mic cable:
 |
| 1. Make sure you have all the parts. |
 |
| 2. Strip and prepare the cable ends ready for soldering. Push through the Mount-a-Mic adapter |
 |
| 3. Solder the female XLR connector. We recommend connecting the barrel lug to pin 1. |
 |
| 4. Fit the plastic strain-relief |
 |
| 5. Slide the metal barrel over the plastic parts |
 |
| 6. Slowly screw the barrel into the adapter, allowing the cable to rotate freely as you go. |
 |
| 7. Fit your choice of connector to the other end, and enjoy! |
No comments:
Post a Comment
Post a comment!
Note: only a member of this blog may post a comment.